Press Center

TDK Corporation announces the launch of the MDF1005 series of noise suppression filters for in-vehicle PoC, used in applications such as ADAS circuits, BUS lines, telematics units, and more. Mass production will begin in December 2020.

TDK Corporation announces the release of Tronics AXO^?315, a miniature high performance 1-axis closed-loop MEMS accelerometer with a 24-bit digital SPI interface and SMD package that reaches quartz sensors performances, outperforms commercial MEMS sensors, and eases integration.

TDK Corporation has extended its portfolio of EPCOS ERU SMT power inductors with the ERU16 choke series, comprised of ten different types. The inductance values of the new B82559B*A016 series, which replaces the former B82559A*A016 series, extend from 1.0?μH to 30?μH, and their saturation currents range from 10.3?A?DC to 40.4?A?DC at 25?°C.

TDK Corporation announces the development of new chip NTC thermistors designed for conductive adhesion mounting, expanding TDK’s NTCSP series product lineup. The chip NTC thermistors are used for temperature sensing and compensation, measuring without direct contact in automotive applications including ABS, inside the transmission or engine, and more.

TDK Corporation presents ModCap? ? a modular capacitor concept for DC link applications. The newly developed power capacitors are available for rated voltages of 1100?V to 2300?V and cover a 365?μF to 2525?μF capacitance range.

TDK Corporation presents the new EPCOS aluminum electrolytic capacitor series B43647* with snap-in terminals. Thanks to their outstandingly high CV product, they are ideal for highly compact solutions in power electronics.

TDK Corporation presents two new series of ThermoFuse^? varistors, which are equipped with monitor outputs and integrated thermal protective components for overvoltage protection.?The MT25 series (B72225M*) currently covers a voltage range from 150?V_RMS to 385?V_RMS, and its maximum surge current capability is 20?kA at a pulse form of 8/20?μs , according to IEC 61643-11.

TDK Corporation presents two new series of EPCOS power capacitors for AC filtering in three-phase delta connection applications.?A key feature of the new capacitors compared with predecessor types is an improved safety device in accordance with IEC-61071, which eliminates the need for soldering.?

TDK Corporation presents a new range of Open Mode chip varistors for electronic automotive assemblies that are directly connected to the battery. The new chip varistors offer reliable protection against transient surge voltages according to ISO 7637-2.

TDK Corporation presents a new packing unit for CeraCharge?, the world’s first SMD?technology solid-state rechargeable battery, in the compact size EIA 1812 (4.4?x?3.0?x?1.1?mm³). The packing unit (B73180A0101M199) includes 10 blister-packed CeraCharge batteries which come in a vacuum-sealed plastic bag.?

TDK Corporation presents the new B58703M1103A* temperature sensor ? specially developed for demanding E-mobility applications, which call for high long-term stability. The NTC sensor is designed for a temperature range of -40°C to +150°C, whereby a temporary load of up to 200°C is permitted.

TDK recently honored its best distribution partners in Europe by presenting them – for the seventh time – with the TDK European Distribution Award 2019. For the first time, the Gold Award in the category “International Volume Distributors” went to Rutronik Electronics.?

TDK Corporation has extended its product range of hybrid-polymer aluminum electrolytic capacitors?and now offers two series with an axial design. The B40600* / B40700* series is designed for rated voltages of 25?V and 35?V. These cover a capacitance range from 780?μF to 2200?μF.

TDK Corporation presents the ACT1210G-800-2P, a new type of common-mode choke that conforms to the standards of the OPEN Alliance (One-Pair Ether-Net) for 1000BASE-T1. Thanks to the high values of the S-parameters, a high amplitude ratio is created between differential and common-mode levels – a decisive factor for signal integrity in the automotive Ethernet.

TDK Corporation presents a new series of compact EPCOS SMT current sense transformers. They are designed for measuring currents of up to 7 A at frequencies between 50 kHz and 1 MHz. The B82801A1* series comprises nine types that offer transformation ratios from 1:20 to 1:150 between the primary and secondary winding.

TDK Corporation has extended its range of dual inductors to include the new EPCOS series B82477D6*. The seven series types cover an inductance range from 2?x?3.9?μH to 2?x?47?μH and are designed for maximum rated currents from 2.83?A to 7.05?A.

TDK Corporation announces that it has recently joined the Responsible Business Alliance (headquartered in Virginia, U.S.A.; hereinafter “RBA”), the world’s largest industry coalition dedicated to corporate social responsibility in global supply chains.

TDK Corporation announced that it has been selected as one of the Derwent 2020 Top 100 Global Innovators by Clarivate Analytics. The news marks the sixth time TDK has been named to the prestigious list, at a time where the company continues to grow and push innovation within digital transformation (DX) and energy transformation (EX).

TDK Corporation presents the fully revised Data Book for aluminum electrolytic capacitors with screw terminal, snap-in, axial and single-ended design. In addition to proven products the book also contains many innovations, such as the screw terminal types of the B43707* and B43727* series.?

TDK Corporation presents the new B43707* and B43727* series of EPCOS aluminum electrolytic capacitors with screw terminals. They are designed for rated voltages of between 400 V DC and 450 V DC and cover a capacitance range from 1800?μF to 18,000?μF.?